1、升降舞臺http://www.qdcbgg.com/盤外的配線應采用切當的方式進行關懷，好比軟管，鋼管等，并且布線應走機床不易損傷的中央。
Wiring landing stage outside the disk should be cut when caring way, like a hose, pipe, etc. and central machine wiring should go easy injury.

2、升降舞臺盤外機床之間的連線或電源線等必須放入橋架中，橋架用底座進行撐持，盤外配管應做到歸正抗衡。
Landing stage plate connection between the external machine or power lines must be placed in the bridge, the bridge carried by the base support, disk outer pipe should be done anyway to compete.

3、升降舞臺http://www.qdcbgg.com/包裝機等加熱設施的連接，布線不克不及設在湊近加熱部份之處。接線在帶有端子臺的聯接箱內發展，加熱器連線使用玻璃、陶管電線，不克不及運用可燃性電線，盤外所有的電線鄰接都要在連貫箱內進行，線的兩端不克不及有找尋。
Connection landing stage packaging machines and other heating facilities, wiring can not be located in the part of the Department leaned heating. In connection with the wiring inside the terminal block development, heater wire glass,

earthenware wire, can not use flammable wires, all the wires adjacent to the outer disc to be in the box were consistent, both ends of the line is not have sought grams less.

4、升降舞臺中繼合端子臺的同一端子頂多連貫兩根電線，感觸器布線如在易被撞部位發展時，應運用軟管作愛惜，軟管應盡量套在感觸器根部。
Landing stage relay terminal block together coherent same terminal at most two wires, wire feeler as easy to hit the site at the time of development, should be used as a spare hose, the hose should be set in the feeler roots.